Go Back   BigEvil Online > BigEvilOnline Forums > BEO - Tech Department
Register FAQ Members List Calendar Mark Forums Read

BEO - Tech Department Discuss anything tech related - projects, mods, questions and troubleshooting.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-26-2015, 09:15 PM
mixwell mixwell is offline
Registered User
 
Join Date: Dec 2009
Posts: 17
Default Reflex board help...maybe HAL?

So finally got around to installing my board (xmag). Board gets power but gun will not shoot in E mode. Tried to enter program mode and the trigger depression does not register so board will not even go into program mode. Before i have to send back everything since i believe its the HAL can anyone think of what else could be the issue besides the sensor. Do magnets on trigger wear out??

thanks guys
Reply With Quote
  #2  
Old 09-27-2015, 10:33 AM
Cougar20th's Avatar
Cougar20th Cougar20th is offline
BEO Mafia
 
Join Date: May 2008
Posts: 2,077
Default

Quote:
Originally Posted by mixwell View Post
So finally got around to installing my board (xmag). Board gets power but gun will not shoot in E mode. Tried to enter program mode and the trigger depression does not register so board will not even go into program mode. Before i have to send back everything since i believe its the HAL can anyone think of what else could be the issue besides the sensor. Do magnets on trigger wear out??

thanks guys
Did the gun shot in e mode before installing the board?

Is the trigger magnet in correctly?
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


"Evil will always triumph. Because good is dumb." Lord Dark Helmet

“The production of too many useful things results in too many useless people.” Karl Marx

Quote:
bah, Keith is a drug dealer. gets you a sniff or a quick taste then he hooks you hard and you HAVE to buy the next item. i hate you, cause you willingly take my money for incredible designs and attention to detail.

Reply With Quote
  #3  
Old 09-27-2015, 04:00 PM
mixwell mixwell is offline
Registered User
 
Join Date: Dec 2009
Posts: 17
Default

Quote:
Originally Posted by Cougar20th View Post
Did the gun shot in e mode before installing the board?

Is the trigger magnet in correctly?
Did not shoot in e-mode before...solenoid wire detatched from stock board...
good call on the magnet. Turned magnet around then backed it up a little and now board will enter program mode.
Also now when i pull trigger in e-mode the green light on board does flash....i assume that means the HES is working and the board recognizes the pull...but gun will still not fire

Any other ideas
Reply With Quote
  #4  
Old 09-27-2015, 06:20 PM
Cougar20th's Avatar
Cougar20th Cougar20th is offline
BEO Mafia
 
Join Date: May 2008
Posts: 2,077
Default

Ok, thats a start.

Have you read/watched the install and program videos?

The noid is plugged in correctly?

The plunger is set to spec?

Does it click if you hold the plunger down? Does the plunger sear move?

Sorry some questions are basic. Im starting from scratch and dont assume anything.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


"Evil will always triumph. Because good is dumb." Lord Dark Helmet

“The production of too many useful things results in too many useless people.” Karl Marx

Quote:
bah, Keith is a drug dealer. gets you a sniff or a quick taste then he hooks you hard and you HAVE to buy the next item. i hate you, cause you willingly take my money for incredible designs and attention to detail.

Reply With Quote
  #5  
Old 09-27-2015, 07:06 PM
mixwell mixwell is offline
Registered User
 
Join Date: Dec 2009
Posts: 17
Default

Quote:
Originally Posted by Cougar20th View Post
Ok, thats a start.

Have you read/watched the install and program videos?

The noid is plugged in correctly?

The plunger is set to spec?

Does it click if you hold the plunger down? Does the plunger sear move?

Sorry some questions are basic. Im starting from scratch and dont assume anything.
Yup first thing i did was look at install and program stuff

Noid plugged in correctly

Do not know if plunger is set to spec..have not made any adjustments to it
and Tuna tunned this gun about a year ago....sear does not move

there is a click when i pull the trigger that coinsides with the light flash
Reply With Quote
  #6  
Old 09-28-2015, 02:09 PM
Practice Target's Avatar
Practice Target Practice Target is offline
BEO Minister of Infomercials
 
Join Date: Apr 2008
Location: Under a rock
Posts: 3,173
Default

Stupid question here but a common occurrence. . . . .

Is the Safety on???

That is the only reason the sear would not move!!!
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
......You know you want one!!

I SPEND MONEY I DON'T HAVE, TO BUILD GUNS I DON'T NEED, TO IMPRESS PEOPLE I DON'T KNOW.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 03:39 AM.


Sometimes it's good to be EVIL® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.